How to Fix the Eufy Vacuum Red Light Issue?

Generally, the Eufy vacuum red light while charging represents that your robot is not connected to the charging base. In addition, there are several other causes leading to this issue which need to be addressed timely.  However, to get rid of this issue, you must know the key causes behind it.

Therefore, this guide provides you with the root causes of the Eufy robovac red light issue. Additionally, you will get to know the effective troubleshooting tips for this issue. So, if you are also looking for troubleshooting assistance on the same, then this guide is for you. So, let’s begin this informative journey!

Why Does the Eufy Vacuum Red Light Issue Occur?

Moreover, a poor connection with the base station is not the only cause of the Eufy robot vacuum red light error. Additionally, the other causes of this recurrent issue are given below:

  • Failed connections with the base station
  • RoboVac is not charging
  • Low battery/ Battery Issues
  • Insufficient power supply
  • The RoboVac dock is not on
  • Poorly connected charging pins 
  • Suction fan issues, etc.

Why Does the Eufy Vacuum Red Light Issue Occur?

As mentioned previously, there are several causes behind the Eufy Robovac Not Charging Red Light issue. However, to ensure the optimal functioning of your device, you must troubleshoot these issues. Hereon, we give you simple and effective tips to eradicate these issues quickly. So, let’s read on!

  • First of all, make sure that you have an adequate power supply to fix the Eufy Vacuum Red Light.
  • Connect all the cables properly to the devices at both ends. If any cable is not working, then replace it immediately. 
  • Properly charge your RoboVac for at least 6 hours and make sure you see a flashing orange light turn solid blue.
  • Connect your RoboVac to its dock station with the charging pins correctly. Check the pins are working efficiently before plugging in. 
  • Check and confirm the battery status of your Robovac if Eufy Robovac Solid Red Light When Charging. If you find any issues with the battery or using it for over a year, replace it immediately.
  • You must check if the charging base and adapters are working as intended. Try reconnecting them and you see a white power LED on the charging base.
  • Regularly clean the vacuum cleaner and suction cups and make sure there is no dirt or debris.
  • Additionally, empty the Vacuum dustbin and keep the brushes clean.
  • Confirm and remove all the obstacles in front of the Robovac while cleaning the operation. Keep the debris or hair, etc. away from wheels and brushes.
  • Further, clean the charging contacts on the vacuum and charging base with a clean and dry cloth.
  • Check and inspect the vacuum filters if these are installed properly. Remove the clogged filters immediately as it may trigger the Eufy Robovac Red Light While Charging. 

If you still having any issues, let us know!

FAQs

When your RoboVac stops in the middle of the cleaning operation with a four-beep error and flashing red light, then it indicates a low battery. To fix it, make sure you connect the base station and adapter properly and have a sufficient power supply.

You need to charge the Eufy RoboVac for at least 6 hours until you see a solid blue light on the device.

A solid red LED appears on your device when the rolling brush of your RoboVac is stuck in the cleaning operation.

Yes, you can leave your RoboVac on charging even if it has charged fully. After charging completely, it will automatically stop drawing power.

Scroll to Top